Application consulting 

We are on hand to support your jobsite! In doing so, we seek to understand how you deploy human resources, material and equipment, in order to provide assistance with our specialists, software and hardware solutions. Together, we can achieve higher productivity through cost and time savings.  

We'll advise you in migrating to the digital jobsite, gladly demonstrating our services using practical examples or directly at your construction site. In ongoing operations, we'll work with you to identify efficiency and performance parameters, in order to support and streamline your routines more effectively.

Surveying and construction site set-up 

Surveying
Our surveyors can map your construction project for you with rover or drone technology. We advise you in generating special topographical models, which are also suitable for the machine controls, and we assist your company in the set-up of the jobsite with GPS base stations for controlling the construction equipment.

We support you with the necessary preliminary planning, permits or the calculation of volumes from 3D measurement.

Our strength is the acquisition of actual three-dimensional mass data for high planning quality.

Jobsite set-up
The efficiency and cost-effectiveness of a construction project is more and more heavily determined by the planning and set-up of the jobsite. Thanks to both integrated and plug & play control systems, all equipment is connected with the site office via Topcon's Sitelink3D and Komatsu Smart Construction communication systems. This enables us to have a constant communication between the office and jobsite.
         

Surveying products

• 

  HiPer VR Rover Pole

  Despite its compact and rugged design, the HiPer VR is chock-full with state-of-the-art GNSS technology.

  more information
• 

  HiPer VR Basis/ Net G-5

  more information
• 

  Totalstation GT100x

  The GT series robotic total stations are a sleeker, high-performance solution that delivers impressive performance from the start, yet it can also grow with your future plans.
  

  more information
• 

  Layout Navigator – LN150

  The LN-150 offers you the perfect solution for digital layout and construction verification. With this easy to learn and use tool, you can automate the entire layout and construction verification process.
  

  more information
• 

  HiPer CR

  more information

„Real construction is often different from the planned model. I can offer you better ways to collect actual data during construction for comparison with the planned model.”

Florian Schlein-Kochanek – Product Specialist Machine Control / Surveying

Data preparation

Take advantage of our experience in the planning of jobsite projects – we advise and guide you in preparing 3D planning data for machine controls or surveying systems. We convert 2D planning data into a full 3D topographical model by attaching elevation information.  

We can respond flexibly to project or planning changes and modify the 3D planning data. We create basic 3D models for you and also integrate "as built" data of the construction equipment. These are sometimes necessary for documentation and accounting of variances between the original plan and the actual implementation.
   

Construction equipment: Better – faster – smarter  

Komatsu's intelligent Machine Control has already established itself in the market. The exclusive technology from Komatsu, already factory-integrated into the crawler dozers and excavators, stands for safety and precision. And the most important success factor of this intelligent Machine Control system from Komatsu is the enormous boost in productivity on our customers' jobsites.  

Matched to your use on the jobsite, we provide you with the right construction equipment, the right attachment and our associated services. Whether it involves a purchase, rental or other Systemnutzung services such as financing etc. – we are delighted to assist and advise you.


        

Intelligent Excavators

• 

  PC210LCi-11

  ALL THE FEATURES OF THE PC210LC-11 ... PLUS INTELLIGENT MACHINE CONTROL.

  • Alias:

    pc210lci-11

  • Name:

    PC210LCi-11

  • Description:

    The PC210LCi-11 now with new intelligent Machine Control 2.0 delivers even higher productivity, efficiency and cost saving gains for the customer. New, fully factory integrated features limit under and over digging, increase ease of operation and maximise machine and attachment utilisation.
    
    • Customer driven and customer proven
    • Fully supported by Komatsu distributor technical experts
    • Quality, reliability, accuracy and performance backed by Komatsu
    
    

  • Motorleistung:

    123 kW / 167 HP

  • Löffelvolumen:

    max. 1,68 m³

  • Max. Grabtiefe:

    6,62 m

  • Betriebsgewicht:

    22.410 t

  more information
• 

  PC290LCi/NLCi-11

  INTEGRATED MACHINE CONTROL SYSTEM AS STANDARD.

  • Alias:

    pc290lci-ncli-11

  • Name:

    PC290LCi/NLCi-11

  • Description:

    The PC290LCi-11 & PC290NLCi-11 with iMC 2.0 further expands the range enabling more customers to benefit from Komatsu’s intelligent Machine Control. New, fully factory integrated features limit under and over digging, increase ease of operation and maximise machine and attachment utilisation.
    
    
    • Customer driven and customer proven
    • Fully supported by Komatsu distributor technical experts
    • Quality, reliability, accuracy and performance backed by Komatsu
    
    
    

  • Motorleistung:

    159 kW / 213 HP

  • Löffelvolumen:

    max. 2,02 m³

  • Max. Grabtiefe:

    6,82 m

  • Betriebsgewicht:

    28.950 - 30.950 t

  more information
• 

  PC360LCi-11

  INTEGRATED MACHINE CONTROL SYSTEM AS STANDARD.

  • Alias:

    pc360lci-11

  • Name:

    PC360LCi-11

  • Description:

    The unique benefits of the new Komatsu PC360LCi-11 combine the high productivity of a bulk earthmoving excavator with the renowned accuracy of Komatsu intelligent Machine Control. This is achieved by powerful hydraulics and breakout forces when excavating, fast cycle times when truck loading, and by completing grading automatically in just one pass. Fewer machine cycles are required and operator performance is improved, with vastly reduced risk of re-work, lower fuel costs and increased machine utilisation.
    
    
    • Powerful and environmentally friendly
    • Maximum productivity due to highly precise, intelligent machine control
    • Komatsu technologies that increase fuel efficiency
    • First-class operator comfort
    • Low noise design: best-in-class reading of 71 dB(A)
    
    
    

  • Motorleistung:

    202 kW / 275 HP

  • Löffelvolumen:

    max. 2,66 m³

  • Max. Grabtiefe:

    7,28 m

  • Betriebsgewicht:

    35.6 - 36.2 t

  more information

Intelligent Crawler Dozers

• 

  D51EXi/PXi-24

  UNIQUE AUTOMATED LEVELLING FROM ROUGH DOZING TO FINISH GRADE.

  • Alias:

    d51exi-pxi-24

  • Name:

    D51EXi/PXi-24

  • Description:

    The Komatsu D51EXi-24 / D51PXi-24 comes with a fully factory installed 3D Global Navigation Satellite System (GNSS) Machine Control system. Add-on components for machine control typically mounted on the blade are now replaced with a factory installed cab top GNSS antenna, an enhanced inertial measuring unit (IMU+), and with stroke sensing hydraulic cylinders. This integrated sensor package is robust and accurate. It eliminates the daily hassles of installing and removing antennas and cables from the blade, and the wear associated with it. This considerably enhances the dozer’s efficiency.
    
    
    • Integrated intelligent machine control, installed ex works as standard
    • Hydrostatic cooling fan with cleaning mode
    • INPAT blade with adjustable pitch
    • Low noise, comfortable workstation
    • Integrated rear view camera
    • Large multifunctional monitor with troubleshooting function
    • Integrated communication antenna
    
    
    

  • Motorleistung:

    99 kW / 135 HP

  • Betriebsgewicht:

    13.830 - 14.260 t

  • Schildkapazität:

    2,7 - 2,9 / 2,9 - 3,4 m³

  • Schildabmessungen:

    3,35 x 1,12 / 3,35 x 1,17 m x m

  more information
• 

  D61EXi/PXi-24

  UNIQUE AUTOMATED LEVELLING FROM ROUGH DOZING TO FINISH GRADE.

  • Alias:

    d61exi-pxi-24

  • Name:

    D61EXi/PXi-24

  • Description:

    The D61EXi-24 / D61PXi-24 comes with a fully factory installed 3D Global Navigation Satellite System (GNSS) Machine Control system. Add-on components for machine control typically mounted on the blade are now replaced with a factory installed cab top GNSS antenna, an enhanced inertial measuring unit (IMU+), and with stroke sensing hydraulic cylinders. This integrated sensor package is robust and accurate. It eliminates the daily hassles of installing and removing antennas and cables from the blade, and the wear associated with it. This considerably enhances the dozer’s efficiency.
    
    
    • 3D GNSS System
    • Highly efficient hydrostatic transmission (HST)
    • Straight power angle tilt (PAT) blade with adjustable pitch
    • Fully adjustable air-suspended seat
    • Large TFT colour monitor
    • 3G mobile communication technology
    
    
    
    

  • Motorleistung:

    126 kW / 171 HP

  • Betriebsgewicht:

    18.640 - 19.580 t

  • Schildkapazität:

    3,4 - 3,8 m³

  • Schildabmessungen:

    3,25 x 1,20 / 3,86 x 1,16 m x m

  more information
• 

  D65EXi/PXi-18

  UNIQUE AUTOMATED LEVELLING FROM ROUGH DOZING TO FINISH GRADE.

  • Alias:

    d65exi-pxi-18

  • Name:

    D65EXi/PXi-18

  • Description:

    The D65EXi-18 / D65PXi-18 bulldozer comes with a fully factory installed 3D Global Navigation Satellite System (GNSS) Machine Control system. Add-on components for machine control typically mounted on the blade are now replaced with a factory installed cab top GNSS antenna, an enhanced inertial measuring unit (IMU+), and with stroke sensing hydraulic cylinders. This integrated sensor package is robust and accurate. It eliminates the daily hassles of installing and removing antennas and cables from the blade, and the wear associated with it. This considerably enhances the dozer’s efficiency.
    
    
    • Integrated intelligent machine control, installed ex works as standard
    • Maximum efficiency increase
    • Unique automatic torque lock
    • Sigmadozer® blade with hydraulic pitch
    • Superior visibility on blade and ripper
    • Large multifunctional monitor
    • Low-drive PLUS undercarriage
    • Integrated communication antenna
    
    
    

  • Motorleistung:

    164 kW / 223 HP

  • Betriebsgewicht:

    22.2 - 23 t

  • Schildkapazität:

    3,69 - 5,61 m³

  • Schildabmessungen:

    3,41 x 1,43 / 3,97 x 1,10 m x m

  more information
• 

  D71EXi/PXi-24

  AN ABSOLUTE ALL-ROUNDER!

  • Alias:

    d71exi-pxi-24

  • Name:

    D71EXi/PXi-24

  • Description:

    The D71i-24 dozer is an all-round performer and a standout choice for any grading or earthmoving application.
    
    • a unique view on the blade thanks to the steeply sloped engine hood
    • EU Stage V emissions-certified engine with a “Heavy-duty” aftertreatment system
    • hydrostatic transmission control systems
      
    
    The D71EXi-24 / D71PXi-24 comes with a fully factory installed intelligent Machine Control 2.0 system.
    

  • Motorleistung:

    179 kW / 240 HP

  • Betriebsgewicht:

    22,7 - 24 t

  • Schildkapazität:

    4,42 - 5,02 m³

  • Schildabmessungen:

    4.01 x 1.265 (INPAT) m x m

  more information
• 

  D85EXi/PXi-18

  UNIQUE AUTOMATED LEVELLING FROM ROUGH DOZING TO FINISH GRADE.

  • Alias:

    d85exi-pxi-18

  • Name:

    D85EXi/PXi-18

  • Description:

    The D85EXi-18 / D85PXi-18 bulldozer comes with a fully factory installed 3D Global Navigation Satellite System (GNSS) Machine Control system. Add-on components for machine control typically mounted on the blade are now replaced with a factory installed cab top GNSS antenna, an enhanced inertial measuring unit (IMU+), and with stroke sensing hydraulic cylinders. This integrated sensor package is robust and accurate. It eliminates the daily hassles of installing and removing antennas and cables from the blade, and the wear associated with it. This considerably enhances the dozer’s efficiency.
    
    
    • Maximum productivity with minimal fuel consumption
    • Intelligent machine control
    • Optimised working equipment
    • First-class operator comfort
    • State-of-the-art controls
    • Tough and reliable
    
    
    

  • Motorleistung:

    199 kW / 271 HP

  • Betriebsgewicht:

    29.350 - 30.800 t

  • Schildkapazität:

    5,9 - 7,2 m³

  • Schildabmessungen:

    3,58 x 1,67 / 4,40 x 1,40 m x m

  more information
• 

  D155AXi-8

  MAXIMUM PRODUCTIVITY MEETS AUTOMATED EFFICIENCY.

  • Alias:

    d155axi-8

  • Name:

    D155AXi-8

  • Description:

    The Komatsu D155AXi-8 is built for hard work on big job sites, where large amounts of material are moved and target surfaces often require final precision levelling. With Komatsu’s intelligent Machine Control fully integrated on the D155AXi-8, this new dozer easily handles the entire process in the most efficient way, from first to last pass.
    
    
    • Integrated intelligent machine control, installed ex works as standard
    • Automated operation from rough dozing to finish grade
    • Highly efficient Sigmadozer® blade
    • Automatic pitch and automatic lifting of the ripper
    • Adjustable auto idle shutdown
    • First-class operator comfort
    • State-of-the-art controls
    • Tough and reliable
    
    
    

  • Motorleistung:

    268 kW / 364 HP

  • Betriebsgewicht:

    41.8 t

  • Schildkapazität:

    9,4 m³

  • Schildabmessungen:

    4,06 x 1,88 m x m

  more information

Training – We train you individually! 

Training for foremen, workshop staff and equipment operators
We will gladly share our expertise with you: We provide competent training to your employees in the use of machine controls, surveying systems, planning software or fleet management.  

The highlights include not only the 2D/3D machine control but also the Smart Construction Dashboard, GNSS systems, total station, construction site layout, surveying, set-up and control as well as base station and reference service, data acquisition with Smart Construction Edge and Drone, function check and troubleshooting, data handling and Smart Construction Remote. 

Our instruction course and training sessions are geared above all towards foremen, workshop employees and machinists.

OUR SERVICES:

• Training in machine control systems in theory and practice
• Advantages of machine control systems and their potential for savings
• Added value of digitalisation
• Consulting and live demonstrations on site at your facility
  

    
Our training programmes
 

Technical Support

With machine control systems from Komatsu and Topcon, you can utilise high-quality innovative products to streamline your work and organisational flows. You can also use our qualified support to take full advantage of the digital opportunities. 

Do you need conceptual advice on integration of machine control systems or jobsite set-up on location? Depending on your requirements, we offer various support programmes. Why not contact us. We will be glad to assist you. 

Our support services:

• Consultation (phone/e-mail)
• Software updates
• Maintenance
• Warranty

Hotline: +49 02943-987999   E-Mail Support:  mcsupport@schlueter-baumaschinen.de

Download Support Flyer
          

Software 

For your construction process, your skilled staff and your construction equipment, we offer software solutions to support and enhance the productivity of daily operations. We would be delighted to demonstrate the individual added value and introduce the software in your company. Please contact us on the following topics:

• Planning data preparation and surveying
• Construction management, construction process and construction progress visualisation, mass calculation
• Remote access and remote maintenance for construction equipment, machine control and surveying systems
• Fleet management
  

Monitor your jobsite in real time. The digital transformation is currently the most promising trend in the construction industry. With Smart Construction, from your office desk you can view the collected, high-precision terrain and equipment data from your jobsite in real time. The progress of the work is visualized, giving you an unprecedented, detailed insight. Jobsite information and comparative data can be shared with all parties involved. 

More information is available at:
https://smartconstruction.io/

SmartConstruction Apps

Sitelink3D lets your equipment speak to you.
Sitelink3D offers you connectivity and control. Sitelink3D gives tabular views of project crews, their exact position, activities, files in use, plus a myriad of other functions. A simple key stroke allows you to interact with any specific machine connected to the system. 

More information is available at:
https://www.topconpositioning.com/de/software-solutions/baumanagement-software/sitelink3d
        

Machine control for utmost precision 

With the unique Topcon systems, you get the ultimate productivity tool for all jobs on the jobsite. Thanks to cab displays, equipment operators know precisely what to do and can work with the highest level of precision. Whether it be ultrasonic, laser, GNSS or inertial sensors: each evolutionary step enables your equipment to work faster and more flexibly and gives you a clear overview.

Excavator Control Systems

• 

  X-52x (2D Control)

  The X-52x is an optimised and modern 2D excavation system that easily gets you to the desired grade.

  more information
• 

  X-53i (3D Control)

  This trim 3D excavator system provides you with modern tools when excavating complex slopes or "in the blind."

  more information
• 

  X-53x (3D Control)

  3D machine control workflows improve the productivity, accuracy and profitability of excavator projects.
  

  more information
• 

  3D-LPS System

  When satellites are not visible, an LPS (Local Position System) is the right choice. Inside tunnels, in densely built-up areas or forests, satellites are not always reachable.
  

  
  

  
  

  more information
• 

  MC-Mobile GPS/LPS

  more information

“With the best tools tailored to your tasks, we help your company on the way to more efficiency, profit and growth. With Topcon systems, you can start small and then grow rapidly.”

Holger Neupert – Head, Product Sales - Machine Control,

Digital Jobsite

Dozer Systems

• 

  3D-MCMAX System

  The 3D-MCMAX system uses two inertial measurement units (IMU), enabling you to doze more quickly and intelligently without the need of a mast.
  

  
  

  more information
• 

  3D-MC² System

  Topcon's 3D-MC² systems represent a vast leap in dozer automation.

  more information
• 

  3D-MC Dual

  With 3D-MC Dual, you boost performance compared to existing 3D systems by up to 200 percent in any terrain and with any equipment operator.
  

  
  

  more information
• 

  3D-MC LPS

  When satellites are not visible, LPS (Local Position System, positioning by means of a total station) is the right choice. LPS plays a key role here. Our LPS uses a standard robotic total station that ensures accurate blade or screed position.
  

  more information

"The construction site of the future is smart, integrated and clean. More than 4 million construction machines are projected to communicate with each other by 2021. I would be delighted to show you in practical application consultations how digital technologies can increase efficiency at the construction site."

Holger Neupert – Head, Product Sales - Machine Control, Digital Construction Site

Grader Systems

• 

  3D-MC² System for Graders

  With 3D-MC², you boost performance compared to existing 3D systems by up to 200 percent in any terrain and with any equipment operator.
  

  
  

  more information
• 

  3D-LPS System for Graders

  The LPS system that grows with your tasks.

  more information
• 

  MM-GPS

  Laser Zone™: A unique coded laser creates a grade control zone with all the advantages of satellite positioning technology, along with the accuracy of a laser.
  

  
  

  more information

“This system is better because it is faster … and always exactly on target. GNSS with inertial sensors will allow your equipment to work faster and more flexibly.”

Andreas Suffrian – Product Specialist Machine Control

Finishers and Compactors

• 

  2D-Systems for Finishers

  The perfect pavement is the result of perfectly controlling the screed. Topcon systems for screed control improve smoothness, ensure precise slopes and layer thicknesses.
  

  
  

  more information
• 

  3D-Systems for Finishers

  3D milling opens up new dimensions in milling. Instead of milling thickness or reading out mill-marks on the road, a 3D design model is used to specify the milling depth.
  

  
  

  
  

  more information
• 

  RD-M1 Scanner

  The RD-M1 scanner collects a constant stream of data as you drive, thus delivering precise data on surface conditions. You can quickly scan miles of road in short time, without the need for costly lane closures or re-work.
  

  
  

  more information
• 

  3D-Systems for Compactors

  Our modern C-53 compaction systems go beyond counting and recording in a single pass. Thanks to secure connectivity with the global Sitelink3D service, each compactor can work not only faster but also becomes a more integral part of the overall project than ever before.

  more information

„Smooth roads, happy drivers. According to plan every time. Whether it’s ultrasound for the 2D-control or millimeter GPS for the 3D-control: You can adapt your finisher  for every job in order to achieve the famous Topcon precision.”

Thomas Kleine – Product Specialist Machine Control

Surveying Products

• 

  HiPer VR Rover Pole

  Despite its compact and rugged design, the HiPer VR is chock-full with state-of-the-art GNSS technology.

  more information
• 

  HiPer VR Basis/ Net G-5

  more information
• 

  Totalstation GT100x

  The GT series robotic total stations are a sleeker, high-performance solution that delivers impressive performance from the start, yet it can also grow with your future plans.
  

  more information
• 

  Layout Navigator – LN150

  The LN-150 offers you the perfect solution for digital layout and construction verification. With this easy to learn and use tool, you can automate the entire layout and construction verification process.
  

  more information
• 

  HiPer CR

  more information

„Real construction is often different from the planned model. I can offer you better ways to collect actual data during construction for comparison with the planned model.”

Florian Schlein-Kochanek – Product Specialist Machine Control / Surveying